Technical characteristics of high-speed stranding machine

1. Maximum spindle speed of 3000rpm.
2. Automatic tension control: When stranded, closing the line from the bottom of the plate when receiving full plate up tension increases demand, this function of automatic tracking adjusts up tension; so that the entire disk up tension is uniform, while the machine can not down to adjust the tension.
3. Host for the oil lubrication, and natural circulation cooling, effectively extending the service life of the spindle bearings.
Over the line system using the new structure, the wire guide wheel from the spindle directly over the line to the bow belt, minus the scratch and jump-share phenomenon Since the angle on the aluminum plate guide wheel failure caused the.
4. The machine is equipped with three pressed devices to ensure that the stranded conductor after the roundness, reduces the loss of insulating materials.
5. Machine with belt drive, no lubrication points inside the machine to keep the machine clean, stranding no oil, various types of surface cleanliness requirements to adapt to the higher species of conductor strands.
6. Adjustment twisted away from simply replacing a reputable to take the wheel, adjust the cutter to just flip the reversing lever, simple to operate, thereby reducing the error rate and the intensity of the operator's work. * Machine bearings are used in Japan's well-known brands, the bow uses new materials, is flexible, and avoids jumping stocks caused by vibration during high-speed operation, the inverter, PLC, magnetic clutches, electromagnetic brakes, hydraulic jacks, etc imported from famous brands, reduce the failure rate and maintenance costs.