Note stranding machine used

Stranding machines when used many accidents, a lot of people who use industrial machines often neglect some attention to detail and lead, so we must see a lot of attention proposed, such as commonly used in industry bundles of copper machines, bundle wire machine, twisted copper machine, stranding machine, extruder, extrusion machine stranding machines are also widely used in industrial manufacturing, and that the following should be noted with you to explain matters:
Safety devices are complete, functioning components are flexible and reliable, and they are loose. Close the protective cover, check the machine if someone is nearby, and other insecurity, after the bell rings to boot, is not allowed to use the normal start jogging in place for longer so that the equipment operates. Always check and tighten cable gland chassis ground screws, etc., to prevent loosening. On-line-for-line after line planes to check whether the top tight top, lock prison. Equipment operation, shall not exceed the operating site, allow someone to equipment in hazardous areas prescribed stay or move around. When equipment operation, to be observed actinomycetes inventory line, the need to observe the head or tail twister, generally not observed in the middle of the twisted body, to prevent accidents. Equipment operations, are not allowed to shift Guadang, are not allowed to wipe the device and the cleaning. Equipment operation, equipment operation must continue to observe the situation, abnormal, should immediately stop treatment. Does not rule out equipment failure can not drive. When using a chain hoist, allow hanging crooked oblique pull, to hang or overload, hanging wire belts should be inspected regularly and, if damaged should be discontinued and immediately replaced. When stranding the machine to have a kink, should prevent extrusion and die bad seat. Keep the work area clean and smooth. If the waste line twisters below and debris, before driving back to clear. Spools neatly prescribed area. The empty plate promptly shipped out the channel. Note that the source of the fire was to prevent fires. Once a piece of equipment overheated smoke, immediately shuts down, and immediately reports the personnel.