NEWS

HOME -NEWS -EVENTS

Technical characteristics of high-speed stranding machine

Source:GEMWELL Updated:2015-08-28 Views: 647Courses
  1. Maximum spindle speed of 3000rpm.
  2. Automatic tension control: When stranded, closing line from the bottom of the plate when received full plate up tension increasing demand, this function of automatic tracking adjustment up tension; so that the entire disk up tension uniform, while the machine can not down to adjust the tension.
  3. Host for the oil lubrication, natural circulation cooling, effectively extending the service life of the spindle bearings.
Over the line system using the new structure, the wire guide wheel from the spindle directly over the line to the bow belt, minus the scratch and jump-share phenomenon Since the angle on the aluminum plate guide wheel failure caused the.
  4. Machine equipped with three pressed device to ensure that stranded conductor after the roundness, reduce the loss of insulating materials.
  5. Machine with belt drive, no lubrication points inside the machine to keep the machine clean, stranding no oil, various types of surface cleanliness requirements to adapt to the higher species of conductor strands.
  6. Adjustment twisted away from simply replacing a lead to take the wheel, adjust the cutter to just flip reversing lever, simple to operate, thereby reducing the error rate and the intensity of the operator's work. * Machine bearings are used in Japan well-known brand, the bow with the use of new materials, flexible, and avoid jumping stocks caused by vibration during high-speed operation, the inverter, PLC, magnetic clutches, electromagnetic brakes, hydraulic jacks etc imported famous brand, reduce the failure rate and maintenance costs.

Return
Catherine:
© Copyrights : Dongguan Gemwell Electrical Machinery Co., Ltd Record Number:GuangDong ICP No. 12042743 -4 sitemap